Copper wire shredder separation machine
Copper wire shredder separation machine
Copper wire shredder separation machine of Doing also called copper wire recycling machine ,copper wire cable grinding machine ,copper wire stripping machine .The raw material of copper wire shredder separation machine is scrap wires, copper wire,aluminum wire,automobile electric line,motorcycle electric line,And the final products of copper wire shredder separation machine is copper and plastic .
First ,Easy operation:the copper wire shrdder sepration machine suitable structure and layout ,only two people operate ,easy to install ,easy to move or transport!
Second ,Energy saving:the separation rate is high of copper wire shrdder separation machien ,the separation rate can reach at least 99.7%.
Third ,environmental friendly,no waste needed and no air pollution.
Copper wire shredder separation machine working principle
Copper wire shredder separation machine working principle
1.We directly put waste copper wire in to copper wire shredder separation machine ,waste copper wire and used cale is cut into granules
2.Then granules are sent to vibration device for separation ,through wind and virbration ,the coppe and plastic are separated
3.Then pure copper come from one side and pure plastic come out form the other side
4.we can collect pyre copper and plastic ,the separatid rate can reach 99.9%
Copper wire shredder separation machine tech data
|
Model |
Voltage |
Power |
Capacity |
Dimension |
Weight |
|
DYTM-400 |
380V |
22.45 kw |
150-200kg/H |
2700*1900*2300(mm) |
1200kg |
|
DYTM-600 |
380V |
36 kw |
300-400kg/H |
3500*1900*2700(mm) |
3000kg |
|
DYTM-800 |
380V |
75 kw |
500-600kg/H |
5500*4500*3300(mm) |
8000k |
Copper wire shredder separation machine main advantage
1.only 2 workers to operate the whole system
2.Cable diameter under 25mm can be processed
3.Purity of copper over 99%
4.No pollution
5.Skid mounted available
6.The whole system is controlled by PLC
7.Small land occupancy
