Copper extraction process machine is the best equipment to recycled the copper particles. Copper extraction process machine brings convenience for us, so we can recycled scrap wire better, the copepr extraction process machine mainly uses the proportion of different materials on the principle of the different of the copper and plastic waste sorting, it’s currently the more advanced a discarded wire processing equipment.
Copper extraction process?
Copper extraction process machine
Please make sure waste copper extraction process machine and another equipments are in good condition. Then start the machine, and keep the machine running unloaded for 5-10 minutes before feeding.
Boot sequence: suction fan1→suction fan 2→blower-feeding blower →riddler→mainframe.
Shutdown sequence: Riddler→blower→suction fan1→suction fan 2→feeding blower→mainframe
Before feeding, pick up the debris especially the iron from the wires in case of the damage to the crusher blades. During the feeding period, the feeding speed should be in accordance with the crushing speed.
3. Fine crushing
If there is any abnormal noise, please stop and check the crusher, or change different size screen.
If there is too much copper or the produced particles are relatively small during the production process, replace the screen and adjust the distance between the fixed knife and the moving one.If the machine is easy to overheat, stop the device and inspect the gearing.
After crushed, the mixed material will be delivered to vibrating device. The copper from vibrating separator is complete copper without plastic, while the copper clad from the opposite discharging hole needs the second crushing.