How does copper wire recovery machine works?

Date:2017-10-26 10:45:00/ FAQ / Chat Online/ Leave message

Waste copper wire recovery machine is a kind of machinery used for recycling waste & scrap copper wire and cables, whose diameter should be below 25mm, Such as Auto electric wire, Motorcycle electric wire, Computer wire and other various miscellaneous material cables, communication cables, etc.
How does copper wire recovery machine works?

Copper wire recovery machine works process

1. Starting
Please make sure copper wire recovery machine and another equipments are in good condition. Then start the machine, and keep the machine running unloaded for 5-10 minutes before feeding.
Attention：
Boot sequence: suction fan1→suction fan 2→blower-feeding blower →riddler→mainframe.
Shutdown sequence: Riddler→blower→suction fan1→suction fan 2→feeding blower→mainframe

2. Feeding
Before feeding, pick up the debris especially the iron from the wires in case of the damage to the crusher blades. During the feeding period, the feeding speed should be in accordance with the crushing speed.

3. Fine crushing
If there is any abnormal noise, please stop and check the crusher, or change different size screen.
If there is too much copper or the produced particles are relatively small during the production process, replace the screen and adjust the distance between the fixed knife and the moving one.

If the copper wire recovery machine is easy to overheat, stop the device and inspect the gearing.

4.Vibrating separator
After crushed, the mixed material will be delivered to vibrating device. The copper from vibrating separator is complete copper without plastic, while the copper clad from the opposite discharging hole needs the second crushing.