For thousands of years, copper and copper alloys have been recycled. The copper processing industry refines copper from metal ores or scrap copper. The leading consumers of copper are wire mills and brass mills, which use the copper to produce copper wire and copper alloys, respectively. End uses of copper include construction materials, electronic products, and transportation equipment. Once refined, copper can be used as a powder in automotive, aerospace, electrical and electronics equipment, in anti-fouling compounds, various chemicals and medical processes. Compounds of copper include fungicides, wood preservatives, copper plating, pigments, electronic applications and specialized chemicals.
Copper wire granulator machine
Henan Doing produced copper wire granulator machine is apply to all kinds of scrap wire, copper wire, aluminum wire, such as automobile electric line, motorcycle electric line, storage battery electric line, waste household appliance disassembly electric line, electromechanical equipment disassembly electric line, computer cable, telephone wire, cable TV line, communication cable and other scrap wires which are difficult to recycle!
How is copper recycled process?
Copper wire granulator machine working process
Please make sure waste copper wire granulator machine and another equipments are in good condition. Then start the machine, and keep the machine running unloaded for 5-10 minutes before feeding.
Boot sequence: suction fan1→suction fan 2→blower-feeding blower →riddler→mainframe.
Shutdown sequence: Riddler→blower→suction fan1→suction fan 2→feeding blower→mainframe
Before feeding, pick up the debris especially the iron from the wires in case of the damage to the crusher blades. During the feeding period, the feeding speed should be in accordance with the crushing speed.
3. Fine crushing
If there is any abnormal noise, please stop and check the crusher, or change different size screen.
If there is too much copper or the produced particles are relatively small during the production process, replace the screen and adjust the distance between the fixed knife and the moving one.