Product Introduction of our Mixed plastic separation machine
Mixed plastic separation machine is for processing the plastic mixture to separated plastics for recycle use. Our mixed plastic separation machine adopts the electrostatic separation method, apply to process the mixed plastics which are difficult to be separated by the density flotation method, such as ABS/PS/PP, PET/PVC, PC/PMM, ABS/HIPS, etc.
Mixed plastic separation machine
Our mixed plastic separation machine has very high separation rate, the primary crushing separation rate is higher than 95%, then the secondary electrostatic separation rate can reach to 100%.
Working process of our Mixed plastic separation machine
Before the plastic mixture go into the high pressure electrostatic separation space, it will go through a special device to get the corresponding charge by self collision and friction. As the input size will make the big difference for the charge, the uniformity and weight of the feed stock also will affect the separation process. If the feed stock is in a very bad state with big differences, better to be screened into different sizes to get the high separation rate. For the feed stock with small differences, also can control the high separation rate by adjusting the separation pressure. As different material separation needs different pressure, it’s better to crush the input material into 10mm granules or pieces, thus to get the high separation rate.
Please check the working principle of ABS/PS/PP separation as below:
Working principle of ABS/PS/PP separation
If you want to know more information about our mixed plastic separation machine, please feel free to contact us.